LogoBryan Jacobs
    Logo Inverted Logo
    • Posts
    • Shortcodes Sample
    • UAGIS
      • UAGIS Overview
      • Bramor PPX Checklist
      • Data Fundamentals
      • ESRI's ArcGIS Pro
      • 2021 04 05 Field Outing
      • 2021 04 12 Field Outing
      • 2021 04 19 Field Outing
      • 3DM
      • UAS Standard Operating Procedure
      • Measure Ground Control Mission Ettiquette
    • EVALS
    Hero Image
    Shortcodes Samples

    This is a sample post intended to test the followings: Default hero image. Different shortcodes. Alert The following alerts are available in this theme. This is sample alert with type="success". This is sample alert with type="danger". This is sample alert with type="warning". This is sample alert with type="info". This is sample alert with type="dark". This is sample alert with type="primary". This is sample alert with type="secondary".

    June 8, 2020 Read
    Hero Image
    Bramor PPX Checklist

    General notes Parrot steps back and forth to ensure they are completed and adhered to. If something is missing or broken, absolutely do not continue with the flight. Notify dispatch. BRAMOR + CHECKLIST UNDO TWO BUCKLES ON BOTOM TW. CTR CLOCKWISE E/A GRABHANDLE: LIFT OFF, SET DOWN KEEP DISTANCE FROM PEOPLE UNPACKING THE COMPONENT BOXES SOP CHECKLISTS ARE WRITTEN TO FOLLOW PROPER PROCEDURES IN A STEP-BY-STEP FASHION.

    January 1, 1970 Read
    Hero Image
    Bramor PPX Checklist

    Parachute Folding and Bramor PPX components There are two Pelican-style cases for The 9 numbered items found when opening the top case are as follows: Batteries Spare cables and weather station specific to platform Extra propellors Two packed parachutes GTech GCS Tablet Camera Lens for RX-1R RGB Sensor GCS Relay Camera lens wipes Utility section w/ wing tape, 193hex, and sensor directions There is also the body of the Bramor.

    January 1, 1970 Read
    Hero Image
    Data Fundamentals

    UAGIS Data Fundamentals Useful Documents Metadata Template Objectives The objective of this article is to inform the reader of basic cartographic skills and how a little bit of domain knowledge can borders the difference between making and missing a GIS project. Overview Proper cartographic skills are imperative to meeting the gold standard for operating with UAS data. From the fundamentals such as turning either a drawing or an aerial image into a map, proper translation techniques and methods (e.

    January 1, 1970 Read
    Hero Image
    ESRI's ArcGIS Pro

    ESRI’s ArcGIS Pro: an unmanned aviator’s reference guide Useful Links Getting Started with ArcGIS Pro by ESRI The Difference between DEM and DSM by MenetAero Geoprocessing Tool Reference Guide by Esri Metadata Template Objectives The objective of this article is to inform the reader of basic cartographic skills and how a little bit of domain knowledge can borders the difference between making and missing a GIS project. Overview So you’ve conducted your mission and processed it using Pix4D (or a service not unlike it).

    January 1, 1970 Read
    Hero Image
    MapData with ArcGIS Pro

    The information I’ve written on my portfolio can also be found on the UAGIS website – my SSOT index for Purdue University unmanned aviators. The Goal I built the UAGIS project with the goal of enabling aspiring aviators to have a single-source of truth index to reference before taking a drone into the field to ensure they are part 107 compliant and following the rules and guidelines set by the university.

    January 1, 1970 Read
    Hero Image
    Measure Ground Control: Mission Ettiquette

    Measure Ground Control: Mission Ettiquette Important Links Measure Ground Control’s application Measure’s article on Waypoint Flights Measure’s article on Grid Flights How to use MGC to connect your phone and start or createa mapping mission Tools MGC Telemetry?GPS?etc Boot MGC Enable platform Establish connection Create mission Lost links/emergency/pre-planning procedure Know your Area It’s important to knwo if you’re in a place you can fly. Take note of what airspace you’re flying in.

    January 1, 1970 Read
    Hero Image
    2021 04 05 Field Outing

    Important Links Generated Layout Pix4D Processing Report Week 12 Field Outing Deliverable Introduction The field outing for April 5, 2021, was three-pronged. First, my flight partner and I were to assemble and disassemble an M600 to ensure refined competency when assembling and disassembling the platform. After, we were to fly a GCP mission with the Mavic 2 Pro. Finally, we were to fly a perimeter mission of Purdue Wildlife Area to gather data for an SRT file to work with.

    January 1, 0001 Read
    Hero Image
    2021 04 12 Field Outing

    Important Documents DSM_shaded_Yourchoice DSM_shaded Ortho map Pix4D Processing Report Week 13 Field Outing Deliverable Introduction The field outing for April 12, 2021, was significantly larger than the prior week's dataset' there was a larger amount of ground covered by the Mavic. The deliverables for this task were to process the data with GCPs for standard Pix4D generation to output a DSM and an orthomosaic. My flight partner and myself were to conduct a flight capturing roughly 8 GCPs within the imagery.

    January 1, 0001 Read
    Hero Image
    2021 04 19 Field Outing

    Important Files Pix4D Processing Report GCP Actual locations shown GCP aggregated locations shown Southmost burn plots over three week period Week 14 Field Outing Deliverable Introduction The field outing for April 19, 2021, was, I believe, the most crisp imagery we managed to capture. For some reason or another (I'd personally credit Matt's skillset with mission planning), the images came out looking spectacular with little to no stitching visible once all of the images were compiled.

    January 1, 0001 Read
    Hero Image
    2021 04 22 3DModel Mission

    External Deliverables Generated .zip pack - this contains the .mp4 Pix4D 3DModel Project - 2021 04 22 Mission Tools DJI Mavic Pro 2, Pix4D, Pix4D Cloud, Blender Introduction The field outing for April 22, 2021, was conducted to aggregate data to generate a 3D Model of a designated item. For the sake of the project and running into a few barriers for prospective ideas, I wound up conducting this mission using my car as the model.

    January 1, 0001 Read
    • ««
    • «
    • 1
    • 2
    • »
    • »»
    Navigation
    • About
    • Skills
    • Projects
    • Recent Posts
    Contact me:
    • Email: bryan.herbert.jacobs@gmail.com
    • Phone: +1 (847) 707-8408

    Toha Theme Logo Toha
    2021 Copyright.
    Powered by Hugo Logo